08/08/2014 @ 07:45 AM Contributed by: loogie78 Views:: 70
I have two ice fishing combos and a carrying case that I would like to sell. I know it may be a little early to be thinking about the ice season but I'm doing a clean out and I'll probably never go ice fishing again. I bought all of these just this past ice season and I used them one time so they are in new condition. I would also like to mention that all of these items are scheels brand so they come with a lifetime warranty (even the case!). So if they break or if you even break them, just go in and get them replaced for nothing! The 24" ultralight pole has a titanium spring bobber on it as well. They both have 4 lb trilene micro ice spun on the reels as well. I have pictures if you want to see them too.
The two ice poles are:
Scheels tournament series, 24" ultra light
Scheels pro classic series, 28" light
I'm asking $40 for everything, including the carrying case. Cash only, first come first serve, no holds. You can just email me or text me if you're interested! 515 343 4737.
I am selling my Mathews z7 bow. It is in perfect condition. Has not been shot a lot. String is always waxed. This is a 60-70 pound bow with a 27.5 inch draw. The rest is included. the sight is not included. Any questions call, text or email.
712-29 nine - 204 nine
Storm Lake, IA
08/07/2014 @ 11:29 AM Contributed by: TW5 Views:: 88
Great Lee-Enfield 303 British with a beautiful Bishop stock and all original metal parts. Has original peep sight with flip up elevator sight. The bore is excellent and is accurate. Comes with 5 full boxes and 1 partial box of factory Herters hunting or target ammo; 180 gr soft points (114 rounds). This rifle was made in England and issued in 1944. Makes a great collector piece or shooter.
Well I did some comparison s with a couple of stoves for my Tipi and have decided to keep the Eldfell and pass this one on. What you will receive:
Three Dog DX stove
4 Gallon Water Jacket
2- Side Tables
2- Sets of Flue Liners for up to 12' of roof height 160" total length with all sections.
Insulator for use through a pass through on a tent or tipi
Sig 1911R Stainless. Night sights. 2 sets of grips, VZ and factory wood. 3 mags, 1 Wilson 47D , 1 factory 7 round and 1 factory 8 round. Excellent condition. Has an idiot mark from the takedown lever from the original owner. under 500 rounds fired. Original box/paperwork.
email for pics
1989 KTM MX 500. 495cc, 2-stroke, all new seals/gaskets, new grips, new kill switch, new chain, fuel tanked removed and cleaned along with carb. tires are in good shape, exhaust has been ceramic coated, could use new exhaust springs, leaks a bit up there. runs and rides great but it is too much bike for me! first ride after the rebuild it put me on my back, cracked ribs, bruised tailbone and broken leg, not the bike for me. HaHa
$1k Or Best Offer (sooner it sells, cheaper i'll go)
For sale, Silver 2000 Dodge Ram Ext Cab 1500 4wd. Just over 200,000 miles. Body has rust and dents, but it runs great and the 4wd functions. Has been a great hunting truck, and will do the same for someone else. $3450 OBO.
Would take firearms trades as partial payment along with the cash. A 308 long range bolt gun set up, Springfield M1A of some variety, AR 15, mini 14's, a 1911, or 3 1/2" semi auto shotgun would all be things that might tickle my fancy. Might consider nice optics as well.
email firstname.lastname@example.org or text or call 319-239-5198. Leave a msg if you call, I have an irregular sleep/work schedule and I rarely answer. I can email photos to those who want to see it.
I am selling a Beavertail Predator mud motor frame. I purchased a fully functional Beavertail Predator motor (Google them, they had a 75 hp Harley motor on them). I purchased an extra frame from them as I planned to have a buddy build another mud motor using mine as a reference. I have since sold the Predator mud motor and am ready to get rid of this frame. I paid $870 for it new. I am looking to unload it for $350. I know nothing about motors/mechanics so I don't know any of the specifics on how you would build it out but I do know that the people at Beavertail said you could mount any size motor on it (it doesn't have to be the Harley motor) and you are ready to go. It does not have a prop on it but it has a shaft, bearings, etc. It does not have a front handle but it has the mounting holes so mount one. I might be interested in trades for anything hunting/shooting related. The frame is in Marion, Iowa and must be picked up there. Contact me through this site or call/text me at 319-360-2286 with any questions.
New exclusive Patent Pending, stainless steel removable bearing assemblies. Upper and lower stainless removable caps and housings exclusive to Beavertail. Drive shaft is polished and balanced with electroless nickel plating to stop corrosion.
The most dependable bearing drive system ever made.
SEAMLESS TUBE CHASSIS (exclusive to Beavertail)
Simply put, there is no stronger frame ever built. This is the same technology that is used in NASCAR chassis. No flat steel is used in the frame. CNC and laser cut parts for precision. All tubes notched with Mitler Bros ultimate tubing notcher. Same machine used in building race car chassis. All frames Tig welded.
Boat is located in Marion, Iowa: I am selling my 2008 Alweld jon boat. It is a model 1860 which means it is 18 ft. long, 60 inches at the bottom and 88 inches at the top and 26 in. sides. The length and width make it extremely stable and safe in all conditions. It has a 45 hp mud motor on it that pushes it upper 20's with a couple of guys and lower 20's fully loaded (4 guys, do, decoys, etc....). THE MOTOR AND BOAT ONLY HAS 62 HOURS ON IT. This boat is perfect for a mud motor or an outboard motor. The all welded construction means you never have to worry about leaks. It has hydro turf on the floor. The boat has the custom camo paint job. It also has running and interior lights and a bilge pump. It also has storage under the deck and a storage box along on side. This is a very solid, multipurpose boat.
I have 2 blinds that go with it. The first blind is a pop-up blind and was made by Shallow Water Marine in Palo, IA. It is a very durable blind made with wind blocking cordura. You can hunt in the coldest of days and not worry about the elements. It has zipper flaps so you can close it up if you are hunting buy yourself or open it up if you are hunting with four of your buddies. It is sturdy enough to bail over the side to chase down those cripples. The blind can be removed by taking out a few screws and pins. The old camo has been removed from the blind but there are loops to add camo to match your hunting conditions.
The second blind is a fully welded and sheeted aluminum blind. The aluminum makes it lightweight but this blind provides cover for the worst of the hunting conditions you will face. This thing is awesome. Unfortunately, the pictures are of the blind off the boat and it doesn't do it justice.
The trailer is a heavy-duty Yacht Club galvanized trailer. It has the plastic slides on the bunks to make it easy to get the boat off and on. You can pull this thing down the road at 80 mph and not even know it is back there.
I also had a custom cover made for the boat and motor ($1,200) that will go with this sale.
Here is a link to my listing that has some additional pictures:
To buy this boat, motor, trailer, blinds and cover new you would be looking at around $24,800. With only 62 hours on it you are buying a like-now setup for about half of that. I have it priced to sell at $12,750 as I am motivated since I am picking up a new 24ft. fishing boat in two weeks. Please contact me through this site or call me at 319-360-2286 with any questions. I HAVE A BUNCH MORE PICTURES if you can't see them on the link. Send me your email and I can send them to you. The boat is located in Marion, Iowa. Thanks for looking. cwbcdad
I have an Evinrude 54 Intruder bow mount trolling motor for sale.
It is 5 or 6 years old still runs good has some scratches from being used.
It's a 24 volt.
Just not big enough for my boat.
Ask for Paul
I'm located in Grimes
Call or text 515-238-4796
Comes with original case and three handgrips, three 17 round magazines. Also I'll include 150 rounds fmj ammo and 20 rounds speer gold dot. In very good condition. Email me for pics. sholess4now[at]hotmail[dot]com
located 15 minutes north of Ames
***buyer please have permit to purchase/or carry***
I have a Burris FastFire III RED-DOT sight for sale. My brother had it mounted and then decided to go another route. Asking $225.00. It is just like new Have the box with it. Also have 15 Knight PowerBelt muzzle-loader .45 cal bullets for sale. They are 205 grain copper-clad aero bullets. Like $15.00 for them. I also have 35 Hornady 6.5 cal 160 grain round nose bullet with box for $5.00 You can contact me at email@example.com Thanks
I am selling my 2010 Beavertail 2072 boat and 2011 Yacht Club trailer. This boat is in excellent condition and is the mother load of all duck boats. Here are the specs:
* All welded .125 aluminum construction with.
* The dimensions are 20 ft long, 72 inches wide at the bottom, 96 inches wide at the top and the sides are 28 inches.
* It has the Beavertail performance pods.
* There are gun boxes that run down each side. One is set up to be a livewell too.
* It has 5 seat bases and 4 camo seats are included in the sale.
* The boat has swamp lights (one is cracked but still works) and interior lights as well as running lights.
* There are also icebreakers welded on the front corners.
* There is a trolling/kicker motor mount on the back of one of the pods. I ran a 10 hp kicker.
The trailer is a 2011 Yacht Club heavy duty bunk trailer. It is galvanized so you don't have to worry about rust. You can pull it down the road at 80 mph and not even know it is back there.
I ran a 60 hp Mercury outboard for my fishing and deep water hunting application. I had a 35 hp Mudbuddy surface drive motor that I used in the mud. With the 72 inch bottom this thing pops up on plane immediately. I was getting upper 30's mph with the 60 hp outboard and lower 20's with the 35 hp Mudbuddy. I HAVE ALREADY SOLD MOTORS. I am selling the boat and trailer only.
This is the ultimate big water fishing/hunting or small marsh duck boat. You can comfortably hunt 5 guys and I've hunted 6 with no problem. It is wide open and plenty of space for any application. To buy this set up new (with the upgrades) it would cost $13,400. I am selling it for $9,000/offer which is a steal. The only reason I am selling is that I purchased a new 2472 Sea Ark and I am picking it up in two weeks so this one has to go. I have a bunch of pictures so feel free to send me your email address if you want to see them. Please contact me through this site or call me at 319-360-2286 with any questions. I live in Marion, Iowa and it must be picked up there. I do have a neighbor who travels the Midwest for work and he might meet you if you cover his gas. Give me a call to discuss. Thanks
15 Hp Mercury Low hours.Open floor plan, 2 seat, trolling motor , fish finder.shorelander trailer, excellant shape.
call or text for pics. Ready to hit the lake.Perfect for Lake Mc Bride.
319-six 3 one-5392 Scott.
I am selling my 6 hp Go devil mud motor. I bought it used and am not sure what year it is. It runs great and pushed the 14 ft jon boat I had it on fine. I would work great on a small fishing, hunting or layout boat. The motor is located in Marion, IA. Feel free to call me through this site or call me at 319-360-2286 with any questions. Thanks
I am selling my 1995 Evinrude 15 hp short shaft motor with electric start. This thing looks and runs like new. I bought it from an elderly neighbor who bought it new. He would use it a couple of times a year to go to a local lake and then he would have it winterized and repeat the next year. It has the original prop. It does NOT come with a gas tank or battery. Those were stolen out of the back of a pickup. Contact me through this site or call me at 319-360-2286
A beautiful 2070 crestliner. Very well cared for, serviced every year, has a 70 horse tiller Johnson with less then 250 hours. The interior is all carpeted, with extra storage, live well ( unusal for a tiller) and rod lockers Great for fishing or playing, This is a cadillac of boats. Serious buyers only. NO GAWKERS, I am leaving the river. And have a nice river home for sale as well. Additional features include:
Easy load trailer with strutt suspension and new tires
Two removable gas tanks- One 8 gallons , one 6 1/2 gallons
Four seats on large, pedistals, bicycle seat, one additional seat as well
Depth finder off the front end
Foot contoled tilt
3 storage compartments
On board battery charger
Ready to fish
Fishes four people very easly
And probably more.. that I forgot; if serious lets talk..
Older Landau jon boat for sale. Model 1247 (12' long by 47" wide). Comes with two comfortable seats. Has oak locks. No motor, no trailer. Fits in back of pick ups. Has been welded to replace rivets that failed. Minimal leaks, if any.
$400 OBO. Will consider trades for guns - can do cash plus/minus.
Can deliver within 50 miles of Slater for a reasonable fee.
08/03/2014 @ 11:58 AM Contributed by: PSDeerHunter Views:: 99
I live in Grimes.
I have for sale a Mossberg super bantam comcb 20 Ga. Mossy oak camo. Only been used a few times turkey hunting and a few times deer hunting bought so I had a gun my nephews could use very good shape .
Comes with a 22 " field barrel 4 chokes Mod, Full, Imp.cyl, and a accu choke extra full for turkey. Also a slugster 24"rifled slug barrel. asking $350.
they sell for $450 at cabelas.
Tru Glo red dot scope $30
Bushnell Trophy red dot scope $40
A 1Optic Red Dot scope $30
All 3 scopes for $ $75
Nordic Track A2050 Treadmill $175
Ask for Paul
I have a couple lightly used (5 times or less) fishing rods and reels for sale. A one piece, 7' St. Croix Eyecon MLF and a one piece 6'6" St. Croix Avid MLF. Both rods in like new condition. I also have a Pflueger Purist Spinning reel (1330) spooled with 10 lb suffix 832 and a Shimano Sahara 2500 spooled with 8 lb power pro. If interested please text or call 712.269.0329. Thank you.